View PDZ-BSERIES_275861.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D049
PDZ-B series Voltage regulator diodes
Product specification Supersedes data of 1998 Apr 23 2002 Feb 18
Philips Semiconductors
Product specification
Voltage regulator diodes
FEATURES * Total power dissipation: max. 400 mW * Small plastic package suitable for surface mounted design * Wide variety of voltage ranges: nom. 2.4 to 36 V (E24 range) * Tolerance approximately 2%.
handbook, halfpage
PDZ-B series
PINNING PIN 1 2
APPLICATIONS * General voltage regulation. DESCRIPTION Low-power general purpose voltage regulator diodes in a small plastic SMD SOD323 package. MARKING TYPE NUMBER PDZ2.4B PDZ2.7B PDZ3.0B PDZ3.3B PDZ3.6B PDZ3.9B PDZ4.3B PDZ4.7B MARKING CODE Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z7 TYPE NUMBER PDZ5.1B PDZ5.6B PDZ6.2B PDZ6.8B PDZ7.5B PDZ8.2B PDZ9.1B PDZ10B MARKING CODE Z8 Z9 ZA ZB ZC ZD ZE ZF TYPE NUMBER PDZ11B PDZ12B PDZ13B PDZ15B PDZ16B PDZ18B PDZ20B PDZ22B
1
Top view
Fig.1 Simplified outline (SOD323) and symbol.
,
cathode anode MARKING CODE ZG ZH ZJ ZK ZL ZM ZN ZP - - -
DESCRIPTION
2
MAM387
TYPE NUMBER PDZ24B PDZ27B PDZ30B PDZ33B PDZ36B
MARKING CODE ZQ ZR ZS ZT ZU
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL IF IZSM Ptot Tstg Tj Note 1. Device mounted on a printed-circuit board measuring 11 x 25 x 1.6 mm. PARAMETER continuous forward current non-repetitive peak reverse current total power dissipation storage temperature junction temperature tp = 100 s; square wave; Tamb = 25 C prior to surge Tamb = 25 C; note 1; see Fig.2 CONDITIONS MIN. MAX. 200 see Table 2 400 +150 150 mW C C UNIT mA
-65
2002 Feb 18
2
Philips Semiconductors
Product specification
Voltage regulator diodes
THERMAL CHARACTERISTICS SYMBOL Rth j-s Rth j-a Note 1. Device mounted on a printed-circuit board measuring 11 x 25 x 1.6 mm. CHARACTERISTICS Table 1 Total series Tj = 25 C unless otherwise specified. SYMBOL VF IR PARAMETER forward voltage reverse current PDZ2.4B PDZ2.7B PDZ3.0B PDZ3.3B PDZ3.6B PDZ3.9B PDZ4.3B PDZ4.7B PDZ5.1B PDZ5.6B PDZ6.2B PDZ6.8B PDZ7.5B PDZ8.2B PDZ9.1B PDZ10B PDZ11B PDZ12B PDZ13B PDZ15B PDZ16B PDZ18B PDZ20B PDZ22B PDZ24B PDZ27B PDZ30B PDZ33B PDZ36B CONDITIONS IF = 10 mA; see Fig.3 IF = 100 mA; see Fig.3 VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1 V VR = 1.5 V VR = 2.5 V VR = 3 V VR = 3.5 V VR = 4 V VR = 5 V VR = 6 V VR = 7 V VR = 8 V VR = 9 V VR = 10 V VR = 11 V VR = 12 V VR = 13 V VR = 15 V VR = 17 V VR = 19 V VR = 21 V VR = 23 V VR = 25 V VR = 27 V 3 PARAMETER thermal resistance from junction to soldering point thermal resistance from junction to ambient note 1 CONDITIONS
PDZ-B series
VALUE 130 340
UNIT K/W K/W
MAX. 0.9 1.1 50 20 10 5 5 3 3 2 2 1 500 500 500 500 500 100 100 100 100 50 50 50 50 50 50 50 50 50 50
UNIT V V A A A A A A A A A A nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA nA
2002 Feb 18
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... Table 2 Per type Tj = 25 C unless otherwise specified. WORKING VOLTAGE VZ (V) at IZ = 5 mA MIN. PDZ2.4B PDZ2.7B PDZ3.0B PDZ3.3B PDZ3.6B PDZ3.9B PDZ4.3B PDZ4.7B PDZ5.1B PDZ5.6B PDZ6.2B PDZ6.8B PDZ7.5B PDZ8.2B PDZ9.1B PDZ10B PDZ11B PDZ12B PDZ13B PDZ15B PDZ16B PDZ18B PDZ20B PDZ22B PDZ24B PDZ27B PDZ30B PDZ33B PDZ36B 2.43 2.69 2.85 3.32 3.60 3.89 4.17 4.55 4.96 5.48 6.06 6.65 7.28 8.02 8.85 9.77 10.78 11.74 12.91 14.34 15.85 17.56 19.52 21.54 23.72 26.19 29.19 32.15 35.07 MAX. 2.63 2.91 3.07 3.53 3.85 4.16 4.48 4.75 5.20 5.73 6.33 6.93 7.60 8.36 9.23 10.21 11.22 12.24 13.49 14.98 16.51 18.35 20.39 22.47 24.78 27.53 30.69 33.79 36.87 DIFFERENTIAL RESISTANCE rdif () at IZ (mA) 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 at IZ (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 TEMP. COEFF. SZ (mV/K) at IZ = 5 mA (see Figs 4 and 5) TYP. -1.6 -2.0 -2.1 -2.4 -2.4 -2.5 -2.5 -1.4 0.3 1.9 2.7 3.4 4.0 4.6 5.5 6.4 7.4 8.4 9.4 11.4 12.4 14.4 16.4 18.4 20.4 23.4 26.6 29.7 33.0 DIODE CAP. Cd (pF) at f = 1 MHz; VR = 0 MAX. 450 440 425 410 390 370 350 325 300 275 250 215 170 150 120 110 108 105 103 99 97 93 88 84 80 73 66 60 59 NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 s; Tamb = 25 C MAX. 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 5.5 5.5 5.5 5.5 3.5 3.5 3.5 3.5 3.0 3.0 2.5 2.0 1.5 1.5 1.5 1.3 1.3 1.0 1.0 0.9 0.8 2002 Feb 18 4 Philips Semiconductors
Voltage regulator diodes
TYPE NUMBER
MAX. 1000 1000 1000 1000 500 500 600 600 250 100 80 60 60 60 60 60 60 80 80 80 80 80 100 100 120 150 200 250 300
MAX. 100 100 95 95 90 90 90 90 60 50 50 40 10 10 10 10 10 10 10 15 20 20 20 25 30 40 40 40 60
PDZ-B series
Product specification
Philips Semiconductors
Product specification
Voltage regulator diodes
PDZ-B series
handbook, halfpage
500
MBK245
MBG781
Ptot (mW) 400
handbook, halfpage
300
IF (mA) 200
300
200
100
100
0 0 50 100 150 200 Tamb (C)
0 0.6
0.8
VF (V)
1.0
Tj = 25 C.
Fig.3 Fig.2 Power derating curve.
Forward current as a function of forward voltage; typical values.
MGL273
MGL274
handbook, halfpage
0
handbook, halfpage
10
12 SZ (mV/K) -1 4.3 SZ (mV/K) 5 11 10 9.1 8.2 7.5 6.8 3.9 3.6
6.2 5.6 5.1 4.7
-2
3.3 3.0 2.4 2.7
0
-3
-5 0 20 40 IZ (mA) 60
0
4
8
12
16
IZ (mA)
20
PDZ2.4B to PDZ4.3B. Tj = 25 C to 150 C.
PDZ4.7B to PDZ12B. Tj = 25 C to 150 C.
Fig.4
Temperature coefficient as a function of working current; typical values.
Fig.5
Temperature coefficient as a function of working current; typical values.
2002 Feb 18
5
Philips Semiconductors
Product specification
Voltage regulator diodes
PACKAGE OUTLINE Plastic surface mounted package; 2 leads
PDZ-B series
SOD323
Q A A1 c Lp HE vMA
D
A
1 E bp
2
(1)
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max. + 0.05 - 0.05 bp 0.40 0.25 c 0.25 0.10 D 1.8 1.6 E 1.35 1.15 HE 2.7 2.3 Lp 0.45 0.15 Q 0.25 0.15 v 0.2
Note 1. The marking bar indicates the cathode. OUTLINE VERSION SOD323 REFERENCES IEC JEDEC EIAJ SC-76 EUROPEAN PROJECTION ISSUE DATE 98-09-14 99-09-13
2002 Feb 18
6
Philips Semiconductors
Product specification
Voltage regulator diodes
DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS
PDZ-B series
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Preliminary data
Qualification
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2002 Feb 18
7
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2002
SCA74
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613510/04/pp8
Date of release: 2002
Feb 18
Document order number:
9397 750 09335

▲Up To Search▲

Price & Availability of PDZ-BSERIES

	To Download PDZ-BSERIES Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .